The Biefeld Brown Effect

Asymmetric Electrodes

It should now be clear that electrogravitational self-acceleration requires a difference in gravitational divergence between two poles. Using symmetric electrodes, this is as simple as giving one positive charge and the other negative. But it is also possible to create additional asymmetry by making the electrodes themselves asymmetric. This changes the extent of the electric field, which in turn affects the geometric component giving rise to the field of gravity.

To this end, Brown experimented with umbrella-and disc-shaped burners. The umbrella of devices consisting of two electrodes, one positive and one negative, with one electrode in The Shape of a large bowl and the other as a small bowl. Overall, it is a free-air condenser, but with asymmetric electrodes, whose asymmetric electric fields generate unbalanced gravitational divergences and increased acceleration. The disc burners, described above, did the same thing, except that one electrode formed the leading edge of the disc, while the other electrode formed the body and trailing edge.

Biefeld - Brown effect

Lifters

A common application of Biefeld’s Brown effect is in the form of “lifters”-these are constructions made of balsa wood frames, wire, and aluminum foil. The wire lifters separate a grate of negatively charged wires from a grate of grounded or positively charged aluminum fins. They are based on a principle patented in 1957 by Townsend Brown (US Patent No 3 018 394 entitled “electrokinetic transducer”). Although lifters have existed since the late 1950s, they have only recently become popular. They are easy to assemble and require only a moderate high voltage supply, about 30 kilovolts.

How can work pushers? In the same way that Brown’s newer devices worked: by a combination of electrogravitational mechanisms and ionic wind. The asymmetry of the electrodes alone guarantees a true electrogravitational component of the propulsion, while it is clear to observe in action that the ionic wind is also involved. Biefeld Brown Effect

Some say the ionic wind cannot explain the level of wind generated by the lifts. I agree with that, but it must also be taken into account that the negative ions create an electrostatic cooling effect, converting the thermal energy into kinetic energy, cooling the air while accelerating it. Thus, the wind results not only from the fact that the air is negatively ionized and attracts to the positive electrode, but also because it gains additional kinetic energy through the phenomenon of negative electrostatic cooling.

Nevertheless, for those who want to disassemble the Biefeld-Brown effect by attributing it entirely to the ionic wind, it must be stressed that closed capacitors, cellular gravitators, also accelerate themselves without any ionic wind effect. The electrogravity comes mainly from the gravitational component of the electric field, exploited for propulsion via the asymmetric gravitational field of the electric dipoles. Brown also experimented with disk burners in vacuum chambers and observed them accelerating almost as fast as when they were operating at atmospheric pressure. The Biefeld – Brown Effect

Experimental set up

To confirm the Biefeld-Brown effect,:

200 kilovolts of direct current, at least 200 microamps, high voltage semiconductor generator — this is mainly a self transformer, a television pocket transformer and a transistor circuit, and a multistage cockroft-walton voltage multiplier and rectifier. You can buy them From Information Unlimited.

metal condenser plates – made of aluminum foil or aluminum Shard cut into rounded squares. Rounded edges are necessary to avoid arcing and Crown leakage.

dielectric sheets-made from the best available dielectric material. These should be cut into squares that are larger than metal plates. The appropriate materials are polypropylene, polystyrene, mica and, if available, ceramic plates with high K content. make sure the sheets are thick enough to prevent the dielectric failure or your gravitator will burn.

paraffin wax or transformer oil – because metal plates take up space because of their thickness, there will be slight spaces between one dielectric sheet and another. Once all the plates and sheets are interspersed and connected, it is best to immerse them in transformer oil or to mold them in paraffin or resin. The Biefeld – Brown Effect

It’s just the basics…examine Brown’s 1927 patent for more information. Also be careful that as a high voltage generator zaps gently you should touch it, once this electricity is stored in a capacitor it reaches lethal power levels. Once, I was stupid enough to dismantle a gravitator capacitor a few days after I charged it with a Van de Graaf Generator…I thought it was unloaded, but the shock I got when I put my fingers in it to take it apart pushed me back against the wall. Only do this if you are a responsible and intelligent hobbyist, as I will not take any responsibility for what you do with this information.

  • 200 kilovolts of direct current, at least 200 microamps, high voltage semiconductor generator — this is mainly a self transformer, a television pocket transformer and a transistor circuit, and a multistage cockroft-walton voltage multiplier and rectifier. You can buy them From Information Unlimited.
  • metal condenser plates – made of aluminum foil or aluminum Shard cut into rounded squares. Rounded edges are necessary to avoid arcing and Crown leakage.
  • dielectric sheets-made from the best available dielectric material. These should be cut into squares that are larger than metal plates. The appropriate materials are polypropylene, polystyrene, mica and, if available, ceramic plates with high K content. make sure the sheets are thick enough to prevent the dielectric failure or your gravitator will burn.
  • paraffin wax or transformer oil – because metal plates take up space because of their thickness, there will be slight spaces between one dielectric sheet and another. Once all the plates and sheets are interspersed and connected, it is best to immerse them in transformer oil or to mold them in paraffin or resin.

It’s just the basics…examine Brown’s 1927 patent for more information. Also be careful that as a high voltage generator zaps gently you should touch it, once this electricity is stored in a capacitor it reaches lethal power levels. Once, I was stupid enough to dismantle a gravitator capacitor a few days after I charged it with a Van de Graaf Generator…I thought it was unloaded, but the shock I got when I put my fingers in it to take it apart pushed me back against the wall. Only do this if you are a responsible and intelligent hobbyist, as I will not take any responsibility for what you do with this information.

Conclusion

The Biefeld-Brown effect demonstrates a link between electricity and gravity. Taking into account the above explanation, it should be clear why the electric dipoles accelerate themselves towards the positive pole; the positive pole converges space, the negative poles diverge space, and being that between the poles these distortions cancel each other out while outside of these poles they point in one direction, the dipole as a whole should accelerate in one direction. Biefeld Brown Effect

One Comment

Add a Comment

Your email address will not be published. Required fields are marked *